• 1.800.860.6272
  • Shopping Cart

    There are 0 items in your cart.

    You have no items in your shopping cart.

    Cart Subtotal: $0.00

    Home / Science projects / Make a Tomato Battery + Video
    • Make a Tomato Battery + Video

      Make a Tomato Battery + Video

      You can produce electricity with two metal strips and a tomato! Hear the electricity crackle using a pair of headphones. We used a ripe red tomato from a grocery store, although green tomatoes will work even better, as they are more acidic. This experiment is most impressive with metal electrodes, but many different kinds of metal will work. Try using a piece of copper wire (or a penny made before 1982), and a paper clip or galvanized nail. Although we suggest using alligator clip leads because they are easier to connect, any insulated copper or electrical wire will work well.

      >>Watch our video to see the tomato battery in action!

      What You Need:

      What You Do:

      1. Cut the tomato in slices, then cut each slice into smaller pieces. Put half the chopped tomato (including seeds and juice) in each beaker. Mash the tomato pieces with a spoon to make a pulpy mixture.
      2. Insert a copper and zinc electrode into each beaker, making sure that they do not touch. You have now made two battery cells! Set one beaker aside for the moment.
      3. In the remaining beaker, clip one wire lead to the zinc electrode and another to the copper electrode.
      4. Hold the headphones near your ears, then touch the loose ends of the wire leads to the metal end of the headphone cord. If you look closely at the headphone plug, there will be several sections. Try touching the wires to different sections until you can hear the crackle of electricity that is being produced by your tomato battery cell.

      What Happened:

      The noise you heard was caused by the flow of electricity through the wires. This electricity was created by the reaction of the tomato pulp and metal. The zinc reacts with the acid in the tomato, and tiny particles with a negative charge (electrons) are set loose into the tomato juice. These negative electrons are pulled toward the copper electrode, which has a positive charge. (In electricity, just as in magnetism, opposites attract). Every battery has a negative side and a positive side. In the tomato battery, the copper electrode is the positive terminal, and the zinc electrode is the negative terminal. The electric current runs from negative to positive, and back around again when connected in a complete circuit.

      Experiment with different kinds of electrical circuits, and test the effect it has on the noise you can hear through the headphones:

      1. To produce more power, connect two tomato battery cells together. With a wire lead connect one positive terminal (copper) to the negative terminal (zinc) on the other cell. Hook a wire lead onto each of the remaining terminals, then hold the two free ends of the leads up to touch the headphone plug.
      2. Does the noise sound different now? Is it louder? Does the battery seem to have more power? This circuit is a series circuit (pictured above).
      3. To build a parallel circuit with your homemade battery cells, hook the two positive (copper) terminals together with one lead and the two negative (zinc) terminals with another lead. Clip one end of the remaining leads onto each of the electrodes in one of the cells and run the free ends to the headphones. 

      Voltage measures the force of electrons moving through a circuit, while amperage measures the amount of current (the number of electrons flowing through). In a series circuit, the voltage is doubled, but the amperage stays the same as with just one battery cell. In a parallel circuit, the amperage is doubled, but the voltage is the same as with one cell. Which kind of circuit you use depends on what balance of voltage and amperage you need.

      If you want to take an accurate measure of the power in volts and amps that your tomato battery is able to produce, use a digital multimeter. You can also try powering other small electronic devices with your tomato battery! You'll need to make three or four battery cells, and connect them in a complete circuit (try both series and parallel). You can power a small light bulb or a buzzer this way. You can also experiment with other homemade batteries - use salt water, vinegar, or a potato.

    « Previous Article: Desert Science Projects

    Next Article: Electricity Quiz Game »

    « Previous Article: Learn About Deserts & Cacti

    Next Article: Desert Life Worksheet »


    By: jawed
    Date: Mar 27, 2015

    This was very good and we can do it at home when we wouldn’t have electric .