Click to view larger Image
Get a FREE Microscope Starter Kit ($28.95 value) with a qualifying microscope purchase! CLICK TO GET OFFER
You can quickly provide a continuous water supply to and from a condenser with this accessory set. It includes a dual faucet adapter, a hose adapter, and 10 feet of 5/16" ID natural red rubber tubing.
The metal dual faucet adapter connects to the two most common faucet spouts on kitchen-type faucets: 15/16" inside threads (female) or 55/64" outside threads (male). Just unscrew the faucet aerator and attach the adapter. Then attach the 3/4" hose adapter to the faucet adapter.
Now you are ready to connect the tubing to your condenser. Cut the tubing into two 5' pieces. Attach one piece from the hose adapter to the water inlet (lower) connection on your condenser. This is the water supply line. Connect the other piece of tubing from the water outlet (upper) connection on the condenser back to the sink. This is the drain line. Turn on the water and control the flow rate using your faucet.
The tubing supplied in this set is adequate if your condenser will be located within about four feet from the faucet. Order another 10' of 5/16" ID natural rubber tubing if your condenser will be located further from the faucet.
Note: The faucet adapter doesn't work on some pull-out faucets or other sizes of faucets. You will need to go to the hardware store to find the correct adapter for your faucet if it is not one of the sizes noted above. Look for a faucet adapter that fits your faucet spout with 3/4" male garden hose threads on the other end. Then it will attach to the hose adapter in this set.
was added to your cart