Lab Kit for use with Abeka Physics Grade 12

Contains materials for completing the labs 1-20 in the Abeka Physics: The Fundamental Science (Grade 12, 2nd edition). NEW AND IMPROVED APRIL 2022. These kits have been re-designed with the homeschooler in mind. This kit is intended for parent use for homeschool or small student group. Additional materials may need to be purchased for labs with multiple groups of students in a classroom or completing multiples of the same labs.

NOTE: A substitute material may be suggested for some labs, please refer to the Contents section below for additional information on materials and designed use. Keep materials after each activity as some are intended to be re-used throughout the year (that includes cups, string, clay, etc).

Some labs may be performed sequentially to reduce the number of materials needed to complete the lab. We understand this will extend the lab time; however, this strategy allows us to keep the kit price reasonable. This keeps the price of the kit reasonable with the ability to complete as many activities as possible. Glassware has been provided so that home or kitchen glassware does not need to be used with chemicals. These kits contain materials for the entire curriculum (one year). They are large and contain lots of materials, we suggest that you remove all the items from the box so that you can figure out what materials are what.

More Information

• Safety Information (SDS)

Science Lab Kit for Abeka Physics Curriculum

This kit includes the following items:

• 1 Meterstick (ships separately)
• 1 Tape measure
• 1 Optic Bench Kit includes:
• 1 Candle
• 1 Double concave lens, 150mm f/l
• 1 Double convex lens, 150mm f/l
• 1 Optic bench lens holder
• 1 Optic bench object marker
• 1 Optic bench object screen
• 1 Optic bench screen holder
• 1 Optic bench supports, pair
• 1 Optic bench kit study guide
• 1 Vernier Caliper
• 1 Density cylinder set
• 2 Sand, 1lb each
• 5 Poly bag, 5in x 8in
• 1 Rubber band, assorted
• 1 50 mL graduated cylinder
• 1 Digital scale
• 1 Aluminum pie plate
• 1 100 g/1 N spring scale
• 1 String, 25ft
• 2 Graduated plastic cup
• 1 Vegetable oil
• 2 Dowels, 1/8in x 12in
• 2 Corks
• 1 PVC Pipe, 12in
• 10 Screw eye
• 1 Protractor
• 1 Digital stop watch
• 1 Dowel, 1/4in x 12in
• 1 500 g/5 N spring scale
• 1 Wood friction block with hook
• 1 Wood ramp
• 1 Support stand
• 1 Burette Clamp
• 1 Hooke's Law spring
• 1 Card stock sheet
• 1 2in wood ball
• 2 3in wood ball
• 2 #4 1-hole rubber stopper
• 2 Foam cup
• 2 250 mL glass beaker
• 1 Beaker tongs
• 1 Thermometer
• 1 Insulated 24SWG copper wire, 15ft
• 2 Absorbent pads
• 1 Modeling Clay stick
• 1 Glass plate
• 1 #0 solid rubber stopper
• 4 Mirror
• 1 Laser pointer
• 1 Glass prism
• 1 Dissection pin pack
• 2 Aluminum foil sheet
• 1 Balloon
• 2 Bar magnets
• 1 Iron Metal Filings, 30 g
• 1 Battery, size 9 volt
• 5 Single bulb socket
• 5 3.7-volt bulb
• 4 Battery, size D
• 4 D Battery holders
• 6 Alligator clip lead
• 1 Digital multimeter
• 1 LED Bulb
• 1 Resistor, 30 ohm, 1/4 watt
• 1 Capacitor, 100 microfarad